Language

Back

English

Butterfly Valve Basics

Home > News > Butterfly Valve Basics

Butterfly Valve Basics

How to Inspect a Butterfly Valve Before Shipment

2026-09-28

butterfly valve is only as reliable as the condition it leaves the factory in. Even a correctly designed valve can arrive on site with coating damage, a misaligned disc, an incomplete bolt hole pattern, a scratched seat, or an actuator that was never tested with the valve. A structured pre-shipment inspection catches these problems before they become installation delays, leak failures, or warranty claims.

MORE DETAILS

What Is a Groove End Butterfly Valve? Complete Guide | Laux Valve

2026-09-21

Groove end butterfly valves explained: AWWA C606 grooved connection, 300 psi ratings, no-flange installation, fire protection & HVAC applications.

MORE DETAILS

How to Reduce Butterfly Valve Operating Torque

2026-09-02

Operating torque is one of the most important numbers in a butterfly valve specification. It determines actuator size, gear operator ratio, stem diameter, bearing load, and how much effort is required to open or close the valve. A valve that needs too much torque is harder to automate, wears out faster, and can become stuck at the worst possible time.

MORE DETAILS

Why Is My Butterfly Valve Leaking? 8 Common Causes and Solutions

2026-08-31

A leaking butterfly valve can be a small nuisance or a serious process safety issue. The first step is to identify where the leak is coming from: the seat, the stem or shaft area, the flange faces, or a damaged body or disc. Most butterfly valve leaks fall into a small number of predictable causes, and many of them can be corrected by proper selection, installation, or maintenance.

MORE DETAILS

What is a PTFE Lined Butterfly Valve? Complete Guide to Design, Materials, Applications & Selection

2026-07-24

A PTFE lined butterfly valve is a quarter-turn isolation and control valve where all wetted surfaces — the body interior, disc, and sealing surfaces — are protected by a continuous layer of PTFE (polytetrafluoroethylene) or a fluoropolymer lining. This lining provides near-universal chemical resistance, making these valves the definitive choice for highly corrosive chemical processing applications where metal valves would fail within weeks or days.

MORE DETAILS

What is an AWWA C504 Butterfly Valve?

2026-07-20

Comprehensive guide to AWWA C504 butterfly valves covering standards, pressure classes, design features, seat types, materials, applications, and comparisons with API 609. Essential knowledge for waterworks professionals.

MORE DETAILS

What is a Double Eccentric Butterfly Valve?

2026-07-17

A double eccentric butterfly valve (also known as a double offset butterfly valve ） is a high-performance flow control valve with dual offset design, delivering zero leakage, low torque & long service life for water treatment, power & chemical pipelines. Learn specs, standards, seat options & actuation solutions.

MORE DETAILS

Vulcanization Process of Butterfly Valve Seats

2026-07-16

The vulcanization process is the most critical manufacturing step in producing high-quality rubber-seated butterfly valves. Unlike mechanically retained (cartridge) seats that rely on compression fit, a vulcanized seat is chemically bonded to the valve body during a high-temperature, high-pressure molding process. The rubber lining becomes integral to the metal body — it cannot shift, extrude, or blow out under pressure.

MORE DETAILS

LAUX Valve is a trusted OEM butterfly valve manufacturer, delivering customized valve solutions with reliable quality and global service.

Download Catalog

Butterfly Valve: Wafer Butterfly Valve; Lug Butterfly Valve; Double Flange Butterfly Valve; PTFE Lined Butterfly Valve; U-section Butterfly Valve; Grooved End Butterfly Valve; AWWA C504 Rubber Seated Butterfly Valve; Double Eccentric Flange Butterfly Valve

Knowledge Center: Butterfly Valve Basics; Butterfly Valve Material; Valve International Standards; Valve Selection Guide

No.3 Street,Beizhakou Town,Jinnan District,Tianjin.China

james@lauxvalve.com

+86 18920833829

We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.